board_home 

Visit the
UK MOT Testing
Industry Portal



 Moderated by: Stealth, MOTman, martins, KevG, bimmer Page:  First Page Previous Page  1  2  3  4  5  6  7  Next Page Last Page  
New Topic Reply Printer Friendly
New MOT Manual.  Rate Topic 
AuthorPost
 Posted: Wed May 9th, 2018 08:39 pm
  PM Quote Reply
101st Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
https://mattersoftesting.blog.gov.uk/how-the-new-mot-defect-categories-will-work/

Mil not working as in manual...castrolrob posted on 02 May 2018, essentially its unenforceable I.e.pass and advise for the light not working at all with the added bonus that before much longer you aint gonna be able to advise!The reply concerned comes from DVSA's own standards team....

http://mtaeta.info/thread/3799/opinions-on-new-eml-failure?page=6
Just had clarification via phone call on the MoI and RfR for EML.

The RfR simply says EML indicates a fault. So if no lamp illuminates with only the ignition and then stays off with the engine running it's a pass.

We can only fail if the lamp is on when the engine is running indicating a fault. We may have updated variations to what is classed as an EML but not until after the Go Live date

Back To Top PM Quote Reply  

 Posted: Mon May 7th, 2018 04:35 pm
  PM Quote Reply
102nd Post
sledge
Member
 

Joined: Thu Mar 29th, 2018
Location:  
Posts: 4
Status: 
Offline
Mana: 
Well the new manual is here.
Spent all day reading it.
Interesting lol.
I'm going to charge £20 a throw for my summary cos I bet the majority of testers aren't going to waste a day of their lives to read it.
And yes it would have been better if they had got an adult to proof read it! eg. 4.6.1 and 3.5

Back To Top PM Quote Reply

 Posted: Tue May 1st, 2018 01:34 pm
  PM Quote Reply
103rd Post
castrolrob
Trade Member
 

Joined: Sun Sep 10th, 2006
Location: Luton,a Minor Province Of, Bangladesh
Posts: 1377
Status: 
Offline
Mana: 
as ive posted elsewhere I requested they get someone with an adult reading level to proof read it,im not hopeful this will occur:shock:

Back To Top PM Quote Reply  

 Posted: Tue May 1st, 2018 12:59 pm
  PM Quote Reply
104th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
Reverse lamp(s) if light output is reduced its a major fail, if the lens is defective, adversely affecting the light or if the light don’t work its minor:D

Back To Top PM Quote Reply

 Posted: Tue May 1st, 2018 12:22 pm
  PM Quote Reply
105th Post
castrolrob
Trade Member
 

Joined: Sun Sep 10th, 2006
Location: Luton,a Minor Province Of, Bangladesh
Posts: 1377
Status: 
Offline
Mana: 
youre familiar with the concept that a camel was a horse designed by a committee yes?this new manual appears to follow the same concept and is most certainly a result of the same process:D

Back To Top PM Quote Reply  

 Posted: Tue May 1st, 2018 12:13 pm
  PM Quote Reply
106th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
add that you gotta pass blue Daytime Running Lights & Stop Lamp(s) Does not face rear Minor, Tyre valve stem damaged…Advisory, And the new manual gives 3 defects for shock absorbers you then log into the Training area and there's 5 defects they don't match up :shock:

Back To Top PM Quote Reply

 Posted: Tue May 1st, 2018 11:37 am
  PM Quote Reply
107th Post
castrolrob
Trade Member
 

Joined: Sun Sep 10th, 2006
Location: Luton,a Minor Province Of, Bangladesh
Posts: 1377
Status: 
Offline
Mana: 
add that you need more than 1 wheel nut missing to fail it now:shock:load ratings not displayed pass to name but a few....

Back To Top PM Quote Reply  

 Posted: Mon Apr 30th, 2018 01:42 pm
  PM Quote Reply
108th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
https://www.motester.co.uk/new-mot-inspection-manual-may-2018-guide-to-changes/

New MOT Inspection Manual from May 20th 2018
Helpful information for MOT Testers
Overview
The new MOT Inspection Manual is totally different from the older version. Here are the key differences:

There is no longer a column for ‘Method of Inspection’, the information is imparted in the run of text throughout each section.
The layout of the Manual is different with some new Sections, and other Sections in the old Manual being dropped.
There are three levels of failures: Minor, Major, and Dangerous.
There are 18 new Testable items, (see below), and over 70 additional inspections of current Testable items. (also see below).
6 Testable items have been removed.
Comparison between old and new Manual Sections
Testers will need to familiarise themselves with these section changes so that when they need to check something out, they won’t waste time looking for items in the wrong place.

Old Manual
Section 1 Lamps Reflectors and Electrical Equipment

Section 2 Steering and Suspension

Section 3 Brakes

Section 4 Road wheels and Tyres

Section 5 Seat Belts and Supplementary Restraint Systems (SRS)

Section 6 Body, Structure and General Items

Section 7 Exhaust, Fuel and Emissions

Section 8 Drivers View of the Road

Section 9 Motor Tricycles and Quadricycles

New Manual
Section 0 Identification of the Vehicle and Operator Services Agency

Section 1 Brakes

Section 2 Steering

Section 3 Visibility

Section 4 Lamps, reflectors and electrical equipment

Section 5 Axles, wheels, tyres and suspension

Section 6 Body, structure and attachments

Section 7 Other equipment

Section 8 Nuisance (includes emissions)

Section 9 Supplementary tests for buses and coaches

Section 10 Seat belt installation checks.

Revised Introduction
The new Introduction has these changes:

Introduction of EU Type Approval categories
Clarification of Dual purpose vehicle definition
American and Canadian pick-up trucks up to 6500kg now in Class 4
Information about Vehicles of Historic Interest added
Reason to refuse to test for presence of a load added
Reasons for Rejection changed to Defects
Minor, Major and Dangerous defect categorisation
Definition of insecure added
Definition of unsafe modification added
Changes to ‘extensively modified vehicles to include modifications for disabled use
New MOT failure definitions
‘Reasons for Refusal’ have been dropped, being now called ‘Defects’. The three levels of Defect are:

minor – deficiencies having no significant effect on the safety of the vehicle or impact on the environment and other minor non-compliances. If only defects of a minor nature are present a test certificate will still be issued
major – deficiencies that may prejudice the safety of the vehicle, have an impact on the environment, put other road users at risk or other more significant non-compliances
dangerous – deficiencies constituting a direct and immediate risk to road safety or having an impact on the environment
Test Certificates will change. Here are three examples:

New Testable Items
Brake fluid
Additional braking device performance
Daytime running lamps
Front fog lamps
Reversing lamps
Bumpers
Prop shafts
All rear drive shafts
Cab security
Cab steps
Floors
Passenger hand grips (quads and heavy trikes only)
Noise suppression material
Undertray security
Emission control equipment
➢ Oxygen sensor

➢ NOx sensor

➢ Exhaust gas recirculation valve

➢ Other emission control equipment

Engine Malfunction indicator lamp
DPF tampering
Fluid leaks – engine, transmission etc
Removed Testable items:
Checks for two different VINs
Checks for reserve pressure of full power hydraulic systems
Class 5 glazing now only applies to vehicles first used from 1 June 1978 and no longer applies to interior doors or panels
Checks for tyre correctly seated on the bead rim removed
Checks of tyre valves removed
Failure for fitment of a space-saver wheel removed
New Inspections of existing Testable items
Identification of Vehicle

Checks for two different VINs removed
New failure for VIN obviously falsified
Brakes
New failure for brake lining or pad wear indicator illuminated
New failure for brake lining or pad incorrectly mounted
New failure for a brake disc or drum missing
New failure for incorrectly installed brake slack adjuster
New failure for additional braking device insecure or inoperative
New failures for other braking system components damaged or corroded e.g. air dryer, antifreeze pump

ABS system cannot be removed on a post 2010 vehicle
New failure for brake fluid contaminated
New failures for air brake reservoir drain device
Checks for reserve pressure of full power hydraulic systems removed
Lamps, Reflectors and Electrical Equipment
New failure for light source and lamp not compatible
Headlamp washers tested on vehicles first used on or after 1 September 2009
Information added about the interaction between position lamps and other lamps
Inspection of end-outline marker lamps now applies to Class 4, 5, and 7
New failures for daytime running lamps
New failures for front fog lamps
New failures for reversing lamps
Steering
New failures for sector shaft condition
New failure for steering gear fixing holes elongated
New failures for electronic power steering wiring damaged or corroded
New failure relating to ‘fly by wire’ steering systems
Axles, Wheels, Tyres and Suspension
Failures previously only applicable to large vehicles now apply to any vehicle
Checks for tyre structure between axles removed
Improved information about assessing tyre damage
Reference to stretched tyres included
Checks for tyre correctly seated on the bead rim removed
Checks of tyre valves removed
Failure for fitment of a space-saver wheel removed
New failure for tyre obviously under-inflated on TPMS equipped vehicles post 1 Jan 2012
New failure for a spring missing
Tyre tables now in Appendix B
Visibility
Driver’s field of vision definition updated
View of exterior mirrors added
New failure for excessively tinted glass
Class 5 glazing now only applies to vehicles first used from 1 June 1978 and no longer applies to interior doors or panels
Chassis frame and Attachments
Vehicle structure now fails if its rigidity is significantly reduced
New checks for strengthening plates and fastening
Exhaust fumes entering cabin failure extended to all vehicles
Information about fuel tanks holed above the fuel line added
New failures for fuel tank and exhaust shields missing
New failure for any part of a gas fuel system defective
New failures for bumper security
New failure for spare wheel carrier condition
New failures for towbar safety devices and coupling indicators
Inspection of drive shafts extended to all transmission shafts, including prop shafts
Inspection now includes drive belts and chains
Inspection of body condition now includes unsafe modifications, component security, including undertrays as well as body pillars on goods vehicles
New failures for cab security
New failures for floor condition
New failures for seat structure condition
New failures for cab steps
New failures for footrests and handgrips where fitted
Nuisance
This new Section includes noise, emissions and fluid leaks

New failures for noise suppression material
New failures for exhaust emission control equipment
New failures for induction leaks
New failure for engine malfunction indicator lamp
New failure for evidence that a diesel particulate filter (DPF) has been tampered with
Metered smoke test date changed to 1 January 1980
New smoke limit of 0.7m-1 introduced for vehicles first used on or after 1 January 2014
Smoke test limits on vehicles post 1 July 2008 will be carried out to either the default standard or the limit on the manufacturers plate where one is displayed
Option to abort the smoke test if levels are significantly in excess of the specified limit values after one acceleration
Fast pass no longer exists
Test is passed if specific limit achieved after one acceleration, otherwise after three accelerations, otherwise after up to a maximum of 6 accelerations
New failure for any visible smoke from a vehicle fitted with a DPF
New failures for fluid leaks – engine coolant and Adblue not included
Other Equipment
Seat belt fitment information moved to Appendix C
Seat belt installation checks moved to Section 10
New failure for seat belt not functioning as intended
Appendix A – Structural Integrity and Corrosion
Change to failure criteria for defects not within a prescribed area
Clarification on acceptable repairs in the case of spot welded panels
Other changes
This includes many items which would currently be a Reason for Refusal, but will only be a Minor Defect after 20th May.

‘Inappropriate repair’ dropped other than for prescribed areas
‘Inappropriate modification’ changed to ‘unsafe modification’
Where only ‘Minor’ deficiencies exist, a test certificate will still be issued. Some of these items currently fail the test and include:
➢ Brake fluid level below minimum mark

➢ Master cylinder cap missing

➢ Brake fluid warning lamp illuminated or inoperative

➢ Power steering fluid below minimum mark

➢ Trailer electrical socket insecure

➢ Direction indicator flashing rate

➢ One of two registration plate lamps missing or inoperative

➢ Several audible warning defects

➢ Many items ‘insecure’ but not likely to become detached

Note: This is provided as a Guide to MOT Testers to identify key differences in the new and old MOT Manuals to avoid mistakes. It is not necessarily a definitive list, and Testers should always refer to the official Manual when conducting an MOT inspection.

Back To Top PM Quote Reply

 Posted: Sun Apr 29th, 2018 12:04 pm
  PM Quote Reply
109th Post
castrolrob
Trade Member
 

Joined: Sun Sep 10th, 2006
Location: Luton,a Minor Province Of, Bangladesh
Posts: 1377
Status: 
Offline
Mana: 
Paul S wrote:
Defect that no longer cause an MOT test fail: master cylinder cap missing.
New item that you will test from 20 May 2018 are: brake fluid contamination.

THIS IS A CONTRADICTION as brake fluid is hygroscopic & therefore will be contaminated if the cap is missing further & without speculating there would be the potential of an imminent risk of failure if this cap was not in place. How then can a tester be expected to 'Minor' it or advise knowing the role brake fluid plays?..or are they expected to just fail 'Major' or 'Dangerous' it under contamination?

To add salt to injury 'brake fluid level below the minimum mark' is a 'Minor' advise?
yup,the reservoir has to be pretty much empty before it becomes a major.maybe they'll fix it before it goes live,maybe they'll leave it as is so we can all look like an incompetent bunch of lackwits,judging by previous performances theres only gonna be one side of the ledger that all the bets are going on:shock:

Back To Top PM Quote Reply  

 Posted: Sat Apr 28th, 2018 02:45 pm
  PM Quote Reply
110th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
time will tell geezer::P:D:D:D

Back To Top PM Quote Reply

 Posted: Sat Apr 28th, 2018 01:09 pm
  PM Quote Reply
111th Post
castrolrob
Trade Member
 

Joined: Sun Sep 10th, 2006
Location: Luton,a Minor Province Of, Bangladesh
Posts: 1377
Status: 
Offline
Mana: 
have given up even bothering with any ministry publications/blogs etc.yes I know it sounds defeatist but I am sick of completely wasting my time.take a look at the other forum with Olivia from dvsa advising presenters they can drive no probs with major defects if you wanna lighten your mood a little:shock:

Back To Top PM Quote Reply  

 Posted: Sat Apr 28th, 2018 12:22 pm
  PM Quote Reply
112th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
Current Matters of Testing Blog...Neil Barlow posted on 24 April 2018
Hi Mike. Which change is confusing? Happy to clarify.

In reply to...21 April 2018
Utterly daft changes and extremely confusing to my mind. Will these changes actually improve road safety and reduce road deaths?

opportunity to snag all these problems!!!

Back To Top PM Quote Reply

 Posted: Wed Apr 25th, 2018 08:22 pm
  PM Quote Reply
113th Post
Stealth
Super Moderator


Joined: Wed Oct 31st, 2007
Location: Back To Reality, United Kingdom
Posts: 1513
Status: 
Offline
Mana: 
Lighten up Paul....I'll add some smileys for you.

:D:D:D:P

Back To Top PM Quote Reply  

 Posted: Wed Apr 25th, 2018 08:17 pm
  PM Quote Reply
114th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
wasnt mythering!!! THE 'DRAUGHT' VERSION seems to be changing cause they need our help & therefore could they not move D day give us all a bit more time

Back To Top PM Quote Reply

 Posted: Wed Apr 25th, 2018 08:10 pm
  PM Quote Reply
115th Post
Stealth
Super Moderator


Joined: Wed Oct 31st, 2007
Location: Back To Reality, United Kingdom
Posts: 1513
Status: 
Offline
Mana: 
Paul S wrote:
The draft version:)

Predictive text. Stop mythering I've put it right.

Back To Top PM Quote Reply  

 Posted: Wed Apr 25th, 2018 08:01 pm
  PM Quote Reply
116th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
Could they not move D day give us all a bit more time...

Back To Top PM Quote Reply

 Posted: Wed Apr 25th, 2018 07:50 pm
  PM Quote Reply
117th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
The draft version:)

Back To Top PM Quote Reply  

 Posted: Wed Apr 25th, 2018 06:50 pm
  PM Quote Reply
118th Post
Stealth
Super Moderator


Joined: Wed Oct 31st, 2007
Location: Back To Reality, United Kingdom
Posts: 1513
Status: 
Offline
Mana: 
The draft version seems to be changing every day just now. We will only know for sure on D day....

Back To Top PM Quote Reply

 Posted: Wed Apr 25th, 2018 05:11 pm
  PM Quote Reply
119th Post
castrolrob
Trade Member
 

Joined: Sun Sep 10th, 2006
Location: Luton,a Minor Province Of, Bangladesh
Posts: 1377
Status: 
Offline
Mana: 
if that bothers you don't look at horn not loud enuff to be heard by another road user minor defect,makes it sorta pointless even having one don't it?electrical wiring for brakes disconnected(and I gotta assume this includes wear sensors)MAJOR DEFCT!

Back To Top PM Quote Reply  

 Posted: Wed Apr 25th, 2018 04:07 pm
  PM Quote Reply
120th Post
Paul S
Member


Joined: Mon Aug 17th, 2015
Location:  
Posts: 315
Status: 
Offline
Mana: 
Damaged (in excess of 10mm, 40mm etc) not adversely affecting driver's view Minor defect... would clear up any confusion

Back To Top PM Quote Reply

Current time is 04:40 am Page:  First Page Previous Page  1  2  3  4  5  6  7  Next Page Last Page    
MOT Forum - The MOT Testing Forum for the UK MOT Testing Industry > Trade Category (MOT Trade Discussions) > MOT Regulations - Need clarification? try here | MOT Forum > New MOT Manual. Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems